Feed grinder is one of the commonly used equipment in the animal husbandry industry. It can crush feed raw materials and improve the utilization rate of feed. However, during use, we often encounter the problem of feed grinder blockage, which will not only affect production efficiency, but also cause equipment damage. Therefore, it is very important to solve the problem of feed grinder blockage. This article will explore how to solve the problem of feed grinder blockage from two aspects: cause analysis and solution.
Feed raw material humidity is too high: Feed raw material humidity is too high is one of the main reasons for feed grinder blockage. When the humidity of feed raw materials is too high, it is easy to stick to the screen of the grinder, causing blockage.
There are many impurities in feed raw materials: Impurities in feed raw materials, such as stones, iron wire, etc., will cause the blade of the feed grinder to be damaged or blocked.
Wear of feed grinder equipment: After long-term use, the blade of the feed grinder will wear, and the wear of the blade will easily cause blockage.
Unreasonable design of feed grinder equipment: Some feed grinders are not designed reasonably, which can easily cause feed raw materials to be blocked during the crushing process.
Control the humidity of feed raw materials: Reasonable control of the humidity of feed raw materials is the key to solving the problem of feed grinder blockage. The moisture content of the feed raw materials can be adjusted to keep the humidity within the appropriate range to avoid blockage caused by excessive humidity.
Clean impurities in the feed raw materials: Before the feed raw materials enter the grinder, the feed raw materials should be screened and cleaned to remove impurities and avoid blockage caused by impurities.
Regular maintenance and replacement of blades: Regular maintenance of the feed grinder, including cleaning the accumulated materials and impurities on the blades and checking the wear of the blades. If the blades are severely worn, they should be replaced in time to avoid blockage caused by blade wear.
Optimize the design of the feed grinder: For feed grinders with unreasonable designs, the blockage problem can be solved by optimizing the design. For example, increase the width of the feed grinder's discharge port, increase the ventilation aperture of the screen, etc.
Increase the running speed of the feed grinder: Appropriately increasing the running speed of the feed grinder can increase the residence time of the feed raw materials in the grinder and reduce the possibility of blockage.
Regularly clean the inside of the feed grinder: Regularly cleaning the accumulated materials and impurities inside the feed grinder can effectively prevent the occurrence of blockage problems.
In summary, solving the blockage problem of the feed grinder requires starting from two aspects: cause analysis and solution. Reasonable control of the humidity of feed raw materials, cleaning of impurities in feed raw materials, regular maintenance and replacement of blades, optimization of feed mill design, increase of running speed, regular cleaning of internal accumulated materials and other methods can effectively solve the problem of feed mill blockage. Only by maintaining the normal operation of the equipment can we improve production efficiency and ensure the sustainable development of the animal husbandry industry.
As a feed mill manufacturer, we are committed to providing efficient and reliable feed mills for agriculture and animal husbandry to meet the growing demand. Our feed mills use advanced technology and innovative design to quickly and evenly crush various feed raw materials into the required particle size. Whether it is crushing grains, beans, straw or other feed raw materials, our machines are able to provide high-quality crushing results.
Related News
Back to list
