Feed grinder is a kind of mechanical equipment commonly used in feed production. It can grind various feed raw materials to improve the utilization rate and quality of feed. However, due to long-term use and improper maintenance, feed grinders are prone to failure, affecting production efficiency. Therefore, correct maintenance and care are the key to ensure the normal operation of feed grinders. This article will introduce the maintenance and care guide of feed grinders.
First, regularly check whether the various components of the feed grinder are operating normally. Including motors, belt transmission devices, feeding devices, crushing devices, etc. Check whether the motor is operating normally and whether there are abnormal sounds and odors. Check whether the belt transmission device is properly tight and whether there is wear and cracks. Check whether the feeding device is unobstructed and whether there are blockages. Check whether the crushing device is severely worn and whether it needs to be replaced.
Secondly, regularly clean the inside and outside of the feed grinder. Internal cleaning is mainly to remove the accumulated materials and impurities in the crushing device to avoid affecting the crushing effect. External cleaning is mainly to remove dust and dirt on the surface of the machine to keep the machine clean. Pay attention to safety when cleaning, and never put your hands into the machine to avoid accidents.
Again, lubricate the various lubrication points of the feed grinder regularly. Lubrication is an important part of ensuring the normal operation of the machine. Before lubrication, clean the lubrication points first to ensure that there are no impurities. Then choose the appropriate lubricant for lubrication. The type and amount of lubricant should be determined according to the requirements of the machine. Apply evenly when lubricating, and avoid too much or too little.
In addition, regularly check whether the safety devices of the feed grinder are intact. Safety devices are important equipment to protect the safety of operators, such as power-off protection devices, overload protection devices, etc. Check whether these safety devices are sensitive and reliable, and whether they need to be repaired or replaced. At the same time, operators should be familiar with safe operating procedures and use the feed grinder correctly to avoid accidents.
Finally, overhaul and replace wearing parts regularly. After a long period of use, each component of the feed grinder will be worn and aged. Therefore, regular overhaul and replacement of wearing parts are necessary measures to ensure the normal operation of the machine. During overhaul, thoroughly check each component of the machine and repair or replace the severely worn parts. When replacing wearing parts, choose reliable quality accessories to ensure the normal operation of the machine.
As an indispensable equipment in feed production, the maintenance of feed grinders are essential. By following the above guidelines, operators can ensure that the feed grinders operate in the best condition, thereby improving production efficiency, reducing production costs, and extending the service life of the equipment. Remember, preventive maintenance is always better than emergency repairs, and regular maintenance and care are the key to ensuring the stable performance of feed grinders.
As a feed grinder wholesaler, we are committed to providing high-quality products and excellent services to meet the needs of our customers. We have many years of experience and expertise to provide customers with comprehensive solutions. Whether it is a small farm or a large farm, we can provide suitable feed grinders to meet the production needs of different scales.
Related News
Back to list
