Feed mixers are common and important equipment in agricultural production. They are widely used in animal husbandry and poultry farming to mix various feed raw materials to ensure the uniformity and nutritional balance of feed. However, with the use of feed and the operation of equipment, certain residues will accumulate inside the feed mixer, such as dust, oil, feed debris, etc. If these residues are not cleaned in time, they will not only affect the working efficiency of the mixer, but also cause equipment failure and even contaminate new feed. In order to ensure the normal operation and extend the service life of the mixer, regular cleaning and maintenance are very important.
This article will explain in detail how to clean the feed mixer, help users understand the basic steps, methods, precautions for cleaning, and how to improve the efficiency and service life of the equipment through cleaning and maintenance.
Cleaning the feed mixer can not only keep the equipment clean and improve work efficiency, but also extend the service life of the equipment. Specifically, cleaning the feed mixer has the following benefits:
Maintaining hygiene and food safety: The feed mixer is a device that directly contacts the feed raw materials, so residual feed impurities, bacteria and mold may affect the quality of new feed and even affect the health of livestock. Regular cleaning can effectively avoid this problem.
Prevent equipment failure: Feed residues will form blockages inside the machine, affecting the normal operation of the mixer, which may cause motor overload or wear of parts, thereby increasing the risk of equipment failure.
Improve work efficiency: Clean equipment can ensure the mixing effect of the mixer, and will not affect the uniformity due to feed residues, thereby improving feed production efficiency.
Extend equipment life: Regular cleaning can remove oil, dust and feed residues on mechanical parts, reduce wear of parts, keep the equipment in good condition and extend its service life.
Before cleaning the feed mixer, some preparations need to be made to ensure that the cleaning process goes smoothly.
Disconnect the power supply: Before any cleaning work, the power supply must be turned off first to avoid electric shock accidents or accidental start-up.
Disassemble movable parts: Depending on the design of the mixer, some movable parts may need to be disassembled, such as mixing blades, screens, conveyor belts, etc. These parts need to be cleaned separately and checked for damage.
Clean large particle residues: Before formal cleaning, you can use a brush or spatula to remove larger particles and debris in the mixer. This helps reduce the workload during cleaning.
Prepare cleaning tools and detergents: According to the type of mixer and cleaning needs, prepare necessary tools such as soft brushes, wire brushes, rags, spray bottles, detergents, etc. Choose a detergent suitable for the material of the equipment and avoid using overly irritating chemicals.
The following are detailed steps for cleaning the feed mixer:
Cleaning the outside of the mixer is the first step in cleaning. External cleaning is not only to maintain the appearance of the equipment, but also to prevent dust, oil and feed residues from entering the interior.
Use a brush to clean surface dust and stains: Use a clean soft brush to clean large particles of dust and stains on the surface of the mixer.
Wipe with a damp cloth: Use a damp cloth to dip in an appropriate amount of clean water or detergent to wipe the external surface, especially the part that contacts the feed. Be careful to avoid moisture entering the electrical control system.
Clean the base of the equipment: Check the base of the mixer, remove dust and stains at the bottom, and avoid dust accumulation that causes the machine to be unstable.
The inside of the mixer is the place where feed residues are most likely to accumulate, so cleaning the inside is crucial. The specific steps are as follows:
Remove the mixing blade: According to the design of the equipment, remove the mixing blade or other mixing device and clean it separately. Usually, a soft brush or wire brush can be used to clean the dirt and feed residue on the surface of the blade.
Cleaning the inner wall and bottom: Use a damp cloth or soft brush to wipe the inner wall of the mixer to remove residual feed powder and stains. If the equipment is designed with a removable screen or filter, it should also be removed for cleaning.
Cleaning the transmission parts: Clean the transmission system, bearings, gears and other parts of the mixer to remove dust and oil. Special attention should be paid to avoid moisture from entering these sensitive parts as much as possible.
Cleaning the feed and discharge ports: Check the feed and discharge ports of the mixer to ensure that there is no blockage and remove stuck feed particles in time.
For oil, mold or other stubborn stains that are difficult to remove after long-term use, deep cleaning can be performed.
Using detergent: Choose a detergent suitable for the material of the mixer, spray it on the stained area, and let it stand for a few minutes before scrubbing. For areas with heavy oil stains, you can use a mixture of warm water and detergent to clean them.
Use a high-pressure water gun: If the design of the mixer allows, you can use a high-pressure water gun to rinse the inside and outside to ensure that stubborn stains are removed. But you need to pay attention to the direction of the water flow to prevent water from entering the electrical system.
After cleaning, the mixer needs to be completely dried to prevent residual moisture from affecting the performance of the machine.
Air drying equipment: After cleaning, wipe the equipment dry with a clean cloth and place the mixer in a well-ventilated place, using natural wind or fans to accelerate drying.
Lubricate mechanical parts: During the cleaning process, some parts such as bearings and gears may lose lubricating oil and need to be refilled with appropriate lubricating oil to ensure smooth operation of the parts.
After cleaning and drying, check all parts to ensure that there is no damage or looseness. Reinstall the mixing blades, screens and other disassembled parts to ensure that they are securely fixed.
Regular cleaning: The feed mixer should be cleaned regularly. It is recommended to perform a simple cleaning after each use and a thorough cleaning and maintenance every month.
Check the worn parts: When cleaning, you can check the wear of the equipment, especially the mixing blades, bearings and transmission system, and replace the damaged parts in time.
Use appropriate cleaning agents: Avoid using highly corrosive cleaning agents to avoid damaging the material of the mixer and affecting the safety of the feed.
Prevent moisture from entering the electrical system: When cleaning, moisture should be prevented from entering the motor, control panel and electrical circuit to prevent short circuit and damage.
Cleaning the feed mixer is a maintenance work that cannot be ignored. It is directly related to the service life, work efficiency and quality of the equipment. Through reasonable cleaning steps and regular maintenance, equipment failures can be effectively reduced, the feed mixer can be kept in the best working condition, and the quality of the feed produced each time can be balanced and safe. When cleaning, be sure to pay attention to operational safety, use appropriate tools and cleaning agents, and ensure that the equipment is not damaged.
As a professional feed mixer dealer, we not only provide high-quality mixing equipment, but also provide customers with a full range of after-sales services. We are well aware that the cleaning and maintenance of the equipment is crucial to its long-term stable operation. Therefore, we provide a detailed cleaning guide. Through correct cleaning and maintenance, not only can the service life of the mixer be extended, but also the uniformity and production efficiency of feed mixing can be improved.
Related News
Back to list
